Norillo® - BreezeSocket - Ceiling Fan With Light That Screws In Within Minutes

The room is too hot to sleep in, but you don't want to hire an electrician.

Summer nights turn stuffy and you wake up sweaty at three. A proper ceiling fan needs wiring, a junction box and often a tradesperson. The floor fan takes up space and looks messy. What you've tried so far either cools badly or takes more work than it's worth.

An ordinary ceiling fan

Needs wiring, a junction box and usually an electrician to fit.

A floor or pedestal fan

Takes up floor space, tips over easily and gives no light.

Portable AC

Expensive, bulky and draws a lot of power for a single room.

Our fan light does what the others couldn't: airflow and light in the ceiling that screw into an ordinary E27 lampholder, controlled by remote, with no tools and no floor space.

Overhead cooling and light, without rebuilding anything

Screw it into an existing E27 lampholder and you get a fan and a light in one unit. Three speeds, dimmable light and a remote you control from bed. No tools, no floor space, no hassle.

• Screws into an E27 lampholder in minutes
• Three fan speeds, dimmable light
• A remote that controls everything from bed
• Folding blades, no floor space in the way
• Draws a fraction of the power of AC

Everything that makes the room sleepable again

Screws straight into an E27 holder

The base fits an ordinary E27 lampholder, so you skip the junction box and the electrician. Cut the power, screw it in, done.

Three speeds for the right breeze

Low for a soft airflow at night, high when it's really warm. You choose right on the remote without getting up.

Dimmable light in three colour tones

Warm for rest, neutral for everyday, cool for work. Set the brightness and colour tone to suit the room and the moment.

Folding blades in tough ABS

The blades fold in towards the body so the unit hangs low and neat. No bulky floor fan making the room feel tighter.

Made for bedrooms, rented flats and small indoor rooms

Best in bedrooms, home offices, guest rooms and smaller rooms where a floor fan is in the way and a proper ceiling fan is too much work. Suits you if you rent and can't or don't want to rebuild.

• Base: E27 lampholder
• Blades: 3 or 4 blades, ABS
• Speeds: 3 settings
• Light: Dimmable, 3000K / 3500K / 6000K
• Motor: Brushless DC, pure copper
• Timer: Switch-off 2h / 4h

Cool comfort without rebuilding the ceiling

A fan cools you, not the room, by moving air against your skin. Our fan light does that overhead, quietly and with the least possible installation.

The E27 base replaces the installation

Instead of fixed wiring and a junction box, the unit uses the power that already goes to the lampholder. So you skip the electrician and can move it between rooms.

A brushless copper motor keeps the noise down

A brushless DC motor in pure copper runs more smoothly and generates less heat than cheap motors. On low it gives a soft airflow without a disturbing buzz, which is why it works at night.

Folding blades give air without floor space

The blades sit on arms that fold out from the body and move air from above. You get a noticeable breeze over the bed without giving the floor up to a pedestal fan.

Neat profile, made to sit in the ceiling

Our fan light versus what you do today

We rent and can't drill into the ceiling. I screwed this into the lampholder in five minutes and now I actually sleep through the night. Being able to lower the speed from bed is the best part.

From box to cool in a few minutes

Cut the power

Turn off the switch to the light before you start. A simple but important safety habit.

Screw it in

Screw the unit into the E27 lampholder just like a bulb. If you have a DCL connector, use an E27 adapter.

Switch on and control

Turn the power on and control the fan, brightness and colour tone with the remote. The blades fold out and you're running.

What you're wondering before you order

Where does it fit? It screws into an ordinary E27 lampholder in the ceiling, the same base as many common lights. If you have a modern DCL connector instead, you'll need an E27 adapter to connect it. Check your ceiling point before ordering.

Do I need an electrician? No. If there's already an E27 lampholder, you screw the unit in yourself, just like a bulb. Just cut the power first. That's the whole point: overhead fan and light without fixed installation.

Is it quiet enough for night? Yes. The brushless copper motor runs smoothly and on low gives a soft airflow without a disturbing buzz, which makes it suitable at night. With the timer you can also set it to switch off after 2 or 4 hours.

Is it stable? The ABS blades are balanced and sit on a fixed base, which keeps the running steady. Make sure the lampholder is secure and the power is off during fitting.

Does one remote control everything? Yes, a single remote controls everything independently: the fan speed, the light brightness and the colour tone. You never have to get up to adjust it.

• Dispatched within 1-2 working days
• Returns up to 365 days from the delivery date
• May be returned used (except hygiene products)
• 100% money-back guarantee

Try it at home for 365 days

We're confident you'll love it, just like our many happy customers. Screw it into the bedroom, run it on a warm night and feel for yourself how much easier the room is to sleep in.

If it still isn't right for you, simply send it back and get all your money back. No awkward process, no hidden conditions. If anything's wrong, we'll send a new one.

The only thing you risk is missing out on a cooler night's sleep.