Norillo® - CableDrive - Pulls Cable Through the Conduit in Minutes, All on Its Own

Pulling cable through conduit takes too long - and wears out your back

Long runs and tight bends where the cable jams. You push, you pull, and often you need two people for a job one should manage. What you've tried so far solves neither the time nor the strain.

Pulling by hand

Slow, heavy and jams at every bend. You finish the day with a wrecked back.

Two people on the pull

One pushing, one pulling. Expensive time, and a colleague you don't always have.

Fish tape and draw wire

Snags in the bends. When the cable misses, you pull it all out and start again.

Our cable feeder does what the others couldn't: it drives the cable through the conduit for you, single-handed and in minutes, even through the toughest bends.

Pull cable on your own, in minutes, without wearing yourself out

Connect your drill, feed in the cable and let the machine do the work. The drive wheels push the cable through the conduit, even through the bends where you'd otherwise jam.

• Does the job on your own, no second person
• The drill pulls - no more pushing and dragging
• Handles the bends where cable usually jams
• Reverse gear when it sticks, no starting over
• Pays for itself in saved time over a few jobs

Everything that lets you pull cable yourself, fast and without a fight

Twin drive wheels feed the cable

Two toothed wheels grip the cable and push it forward into the conduit. You just hold the tool at the conduit opening.

Forward and reverse in one tool

Jammed in a bend? Switch to reverse and back the cable out without pulling the whole run by hand.

Powered by your drill

No motor of its own and nothing to charge. Fit the adapter into the drill you already own and you're working straight away.

Reinforced engineering plastic

A robust housing that stands up to daily life in the toolbox. Tested by SGS and made from CE-approved material.

Made for renovation, new builds and long runs

Held in the hand at the conduit opening, always de-energised. It shines brightest where the pull is hardest: long stretches, tight bends and jobs you do on your own.

• Cable diameter: 5 to 8 mm
• Drive: Drill + key adapter
• Mode: Forward and reverse
• System: Twin drive wheels
• Material: Reinforced engineering plastic
• Certification: RoHS, SGS, CE

It's the drive wheels that do the heavy work, not you

Pulling by hand jams because friction builds up at every bend. Our cable feeder takes the effort off your arms and puts it on the machine.

The drive wheels grip and push

Two toothed wheels clamp the cable between them and feed it into the conduit. The force comes from the drill, so you never have to push or pull yourself.

Drive that beats the friction

In bends the pull builds resistance that stops hand power. The steady push from the wheels drives the cable on where you'd otherwise get stuck.

Reverse without starting over

Two ports give you forward and reverse. When it jams, back the cable up a few centimetres and go again, without pulling the whole run by hand.

Built for the toolbox, not to break

Our cable feeder versus how you pull cable today

Keeps it in the van now. On renovation jobs it saves me in the bends. If the cable jams I reverse and go again, no need to pull it all out by hand.

From box to pulled cable in under a minute

Connect the drill

Put the key adapter into your drill and connect it to the tool's hex input. Nothing to assemble, nothing to charge.

Feed in the cable

Hold the tool at the conduit opening, de-energised, and feed the cable into your chosen port for forward or reverse.

Squeeze the trigger

The drive wheels feed the cable through the conduit for you. If it jams, back up a few centimetres and go again.

What you're wondering before you order

What does it actually do? It pulls an electrical cable through a conduit for you, without you having to push it by hand. You connect your drill, feed in the cable, and the drive wheels move it forward through the conduit, even over long stretches and through bends where cable normally jams. A pull that would otherwise take a long time and often need two people, you do on your own in minutes.

What cable sizes does it fit? It's made for cables between 5 and 8 mm in diameter, which covers most common electrical cables on site. It suits the standard conduit those cables run in.

Do I need to be an electrician? No special knowledge needed. Connect the drill, feed the cable in at the conduit opening and squeeze the trigger. If the cable jams, switch to reverse, reposition and go again. No settings and no manual to wade through.

Does it need charging or its own motor? No. The tool is driven by the drill you already have. There's no built-in motor and no battery to charge, so you're working straight away at the conduit opening.

Is it certified? Yes. It's RoHS-approved, tested by SGS and made from CE-approved material to ISO/GB-T standard.

• Dispatched within 1-2 working days
• Returns up to 365 days from the delivery date
• May be returned used (except hygiene products)
• 100% money-back guarantee

Try it on the job for 365 days

We're confident you'll love it, just like our many happy customers. Take it to your next job, connect the drill and pull a real cable through a real bend, and feel the difference in time and back strain for yourself.

If it doesn't measure up, simply send it back and get all your money back. No awkward process, no hidden conditions. If anything's wrong, we'll send a new one.

The only thing you risk is missing out on a tool that genuinely saves you time on every pull.